QL Light Co.,Ltd is one of the leading China led strips 10 m manufacturers and suppliers with professional factory. Welcome to wholesale products from us.

CRI≥90 Version: very suitable for the application that require high color rendering. It will give you a true color.

Features of QL Constant Current Strips:

1. Constant current version: with stable current, suitable for high quality requirements project.
2. DC12V/DC24V input: Can work with any DC12V/DC24V PWM control system.
3. can work with unstable power supply and without damage. 
4. with temperature Sensor: Can lower the current to protect itself when the temperature is too high.
5. Brightness uniform: With same brightness from the first end to the last end for around 10m.

◆ LED Type: SMD3528
◆ Input Voltage: DC24V
◆ Color: Blue, Green, Warm White, Nature White, Pure White
◆ LED Qty: 60LED/m, 120LED/m, 228LED/m
◆ Beam Angle: 120 degree
◆ IP Ratio: IP20, IP54. IP67 or IP68 Version
◆ IP20: Non-waterproof Version
◆ IP54: Single-Side glued with silicone
◆ IP67: With Silicone Tube
◆ IP68: With silicone tube and silicone glue

Specifications:

Color Rendering Testing Report:

Different IP version:

Applications:

1. Decorative lighting for festivals, events, shows, exhibitions
2. Architectural lighting for canopy, corridor, window, archway,
3. Backlight or edge light for signage
4. Path or contour marking
5. Channel letter lighting

LED Knowledge: 

Copied from LED NEWS.ORG (www.lednews.org)
LED bulb normal temperature, pressure and impact testing 
POSTED ON JULY 10, 2013 BY ADMIN IN LED KNOWLEDGE, LED LIGHTING WITH THERE ARE NO COMMENTS
Test objects: LED bulbs (lamps with LED Driver, finished products).
Test method:
1) Put 5pcs LED bulbs under environment temperature of 25℃;
2) Input the rated voltage to the LED lighting;
3) Power on for 72 hours, and observe whether there is damage to the lamp, thermal deformation of materials and other anomalies;
4) After the light on testing is the impact test, through the relay controller to control the LED bulb in this environment, the steps is: light on 30 seconds, light off 30 seconds, 10,000 times cycles.
Test requirements:
A: After impact test, LED lamps can not leakage, power off and other electrical anomalies.