- INVERTER IGBT PLASMA CUT 60-1
- 2017-12-24 01:53
- Single Phase 220Volts Input Voltage or Three Phases 380Volts Input
Voltage is available according to different markets
Pilot Arc Start increases utting capability and cutting speed, it also improves working lift...
- INVERTER IGBT PLASMA MULTICUT 40PFC CNC
- 2017-12-22 23:13
- 90-270 Volts Input Voltage can be worked in Global market
PFC Technology makes power factor more than 0.99 and energy saving
3 In 1 Multi functions includes Lift TIG,Plasma Cutting witrh Pilot Ar...
- INVERTER IGBT PLASMA CUT 100
- 2017-12-16 17:40
- Pilot Arc Start increases utting capability and cutting speed, it also improves working lift of torch parts Contact and HF ignition are changed automatically according to torch 100% High Duty Cycle at 10...
- INVERTER IGBT MIG 251S/253S/352S
- 2017-12-10 03:08
- Input voltage compensation keeps welding parameters constant even when input voltage change±15%. Thermal overload protection automatically shuts down the power source to prevent high repair cost...
- INVERTER IGBT PLASMA MULTICUT 40
- 2017-12-01 23:12
- 3 In Muilt Function includes HF DC TIG ,Plasma Cutting and MMA
18mm Cutting Thickness is available Air Flow Meter on the front panel is easy to check air flow during the setting and cutting
Mulit Functions and Portable Size are suit...
- INVERETR IGBT MIG MULTIMIG 200PFC
- 2017-11-28 10:03
- 3 In 1 Multi functions includes HF TIG/MMA and Lift Tig
40Amps min.welding current for thin material welding easily
1kg and 5kg Wire Spool Size for different welding job ...
- INVERTETR IGBT MIG 250-1/250-3/315
- 2017-11-20 20:23
- 20kgs Spool is capable
Waveform control by added stability of the arc,even at small current
Welding Capability from 0.6mm to1.2mm welding wire diameter
Digital Voltmeter and Ammeter for easy viewing ...
- INVERTER IGBT TIG 180/200DC PULSE PFC
- 2017-11-18 03:54
- Friendly Digital Control Panel makes easily welding parameters setting
Digital Display can show parameters setting exactly
Wireless Remote Control is optional,remote control distance can be up to 100m
3 In ...
- INVERTER SAW-630/800/1000/1250
- 2017-11-10 06:06
- Power Supply Voltage(V) 3-380/440±15%
Frequency(HZ) 50
Rated Input Power(KW) 55
Rated Input Current(A) 93
Current Range(A) 60-1000
Duty Dycle(40℃ 10min) 102
No Load votage(V) SAW 90 MMA 80
No Load current(A) <1
No load Power(W) 160
Volta...
- IDEALIGBT TIG/MMA DC PULSE TIG 160/180/200DC Pulse
- 2017-11-05 04:53
- Friendly Digital Control Panel makes easier welding parameters setting
Digital Display can show parameters setting exactly
Wireless Remote Control is optional,remote control distance can be up to 100m
3 ...
- INVERTER IGBT TIG 160S/200S/250S
- 2017-10-31 04:27
- HF Mode-High Frenquency TIG Mode
Selectable Down Slope time
Selectable Post Flow time
Generator friendly allows to work with diesel generators and to aviod failures due to its voltage spikes Protections including over-heat ,over-volta...
- INVERTER IGBT MIG MULTIMIG 250PFC
- 2017-10-26 01:13
- 3 In 1 Multi functions includes HF TIG/MMA and Lift Tig
40Amps min.welding current for thin material welding easily
1kg and 5kg Wire Spool Size for different welding job ...
- INVERTER IGBT STICK ARC 400
- 2017-10-17 13:32
- Input voltage compensation keeps welding parameters cinstant even when input voltage change±15%. Lowest input voltage can be 300Volts and highest one can be 470Volts. Therma...
- INVERTER IGBT PLASMA CUT 40PA
- 2017-10-12 04:23
- Protections including over-heat,over-voltage,low-voltage and over-current
Pilot Arc Controller-increases cutting capabilities and and speed and improves tip life. Ideal for g...
- INVERTER IGBT MIG 400/500/650
- 2017-10-12 01:35
- Mild Steel,Aluminum,Stainless Steel and other metals wire are capable
Input Voltage Compensation keeps welding parameters constant even when input voltage change±15%. ...
- INVERTER IGBT TIG 330
- 2017-09-17 05:59
- Multi function includes HF TIG/MMA
Digital Display can show parameters setting exactly
Pulse Function makes excellent welding performance ,special for thin material welding ...
- INVERTER IGBT PLASMA CUT 65
- 2017-09-08 03:06
- Single Phase 220Volts Input Voltage or Three Phases 380Volts Input
Voltage is available according to different markets
Pilot Arc Start increases utting capability and cutting speed, it also improves working lift...
- INVERTER IGBT MMA ARC 160PFC/200PFC
- 2017-09-05 19:09
- Hot Start function for easier arc striking
Arc Force makes welding smoothly
Generator friendly allows to works with diesel generators and to avoid failures due to its voltage spikes Protections including over-heat,...
- INVERTER IGBT MIG 140/200PFC
- 2017-08-29 00:27
- 35A mps min.welding current for thin material welding 1kg and 5kg Wire Spool Size for different welding job
Friendly Interface makes easy operation and adjustment according to different wire
Digital Display for easy view of both current and voltag...